3/8" HIGH PRESSURE BALL VALVE DN10 KIT W/ BRASS SOCKET & PLUG
3/8" high pressure ball valve DN10 kit w/ brass socket & plug: the brass socket and steel plug are not installed on the ball valve.
Use medium thread lock to install the quick connect fittings.
3/8" pressure washing ball valve 3050 psi f nickel plated brass compact design rated to only 176 degrees maximum Fahrenheit **favorite among pressure washers due to the compact handle not catching up on plants, roots, etc. when reeling/pulling hose in upon job completion*** (Increase the lifespan of your ball valve by removing it from the end of your hose prior to reeling it in)
Add this ball valve to the end of your high-pressure hose to allow you to switch from your surface cleaner to the gun/wand assembly without running back and forth to your engine to shut it down to release the pressure in the hose.
Fighting your hose? consider adding a high pressure live gun swivel to this ball valve. we recommend the osmatic 3/8" swivel (6920) or the JE Adams (2238).
Warning!!! Do not use valve half open or half closed. this will cause damage to your valve and lead to pre-mature ball valve failure. do not use this valve with excessively hot water beyond the recommended 176-degree f temperature setting on your hot water heating unit.
8 mm flow port through valve
Thread lock (5004)
Never use Teflon tape on your high-pressure fittings.
https://www.youtube.com/user/roofcleaningequip/videos
SKU: 6292.B