4322S TITAN ALUMINUM 22" FULL FRAME HOSE REEL SS MANIFOLD
4322S full frame Titan products manual hose reel with upgraded 1/2" FPT super swivel. Please leave a note at checkout. If no note is left, we will send either swivel. (8620A) w/ zerk fitting and 1/2" ID stainless steel manifold suitable for Softwash chemicals. Please leave a note at checkout. If no note is left, we will send either swivel.
The TT4322S is an outstanding hose reel we offer to our pressure washers and soft washers. This reel can be stacked with another reel of the same width on top or below using a Titan products stack kit (TT7054).
You need two reducing bushings (2578) and a street 45 (3361) plus a two-wire jump for this reel. If your pressure washer has a plug on the outlet, you need a 3/8" female coupler (2401 or 4630), a 3/8" female plug (3878 or 4959) and a 3/8" male coupler (3004 or 4960ss) to install the jump hose to this reel.
Adding a 3-way ball valve (BV16-3P) to your Softwash set-up will allow you to easily rinse the reel and pump after every use. Sometimes when loading up the hose on the reel, the hose 'sticks out' straight from the stainless elbow on the drum. To avoid this problem, ask for part 2354 (brass for chemical) or 3361 (steel for high pressure).
If you are trying to choose between the full frame Titan hose reel and the u-channel series, consider the following: the lock is standard on this reel and manual reels in the 4300 and full frame series. The U-Channel reels (4800 series) do not offer the hose reel lock in the standard build, but a bungee cord can be wrapped around the hose to prevent unravelling down the road. The full frame can handle a bit more abuse and pulling hose from the sides without 'tweaking' the reel. The full frame reels can be stacked easily, and the u-channel cannot. The u-channel can be more easily mounted on the side railing of an open trailer without requiring too much fabrication while the full frame reels require a bigger support footprint.
Capacity: Holds 550' 3/8", 400' 1/2" ID Flex Tech RT Kuri Tec or yellow ag hose with crimped on stainless steel ends or 300' 5/8" ID, Flex Tech RT, Kuri Tec or yellow ag hose with crimped on SS hose ends we can cut a jump hose to your exact length and crimp on the hose ends for both high pressure and low-pressure hose. A custom length of hose can be assembled in just about any hose we can get our hands on. We can offer a wide assortment of hose ends.
We always recommend a two wire (R2) high pressure hose from your unloader on your pressure washer to the hose reel.
Please see our jump hose section or we can make a custom length.
"https://www.youtube.com/user/roofcleaningequip/videos"
This reel has the estimated capacity to hold the following hose inner diameter hose lengths: 550' of 3/8", 400' of 1/2" and 300' of 5/8".
SKU: TT4322S