PUMP MADE READY / SLAP HAPPY EZ3035G-VRT3-310EZ, BYPASS, PRESS

Pump Made Ready / slap happy EZ3035G-VRT3-310EZ, bypass, pressure relief valve

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this PMR onto the shaft of your gas engine. This pump made ready consists of the pump, a vrt3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.

Features:

Solid ceramic plungers

Standard SAE j609 gasoline mounting flange for up to 13 hp engines

Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating

Die cast, anodized aluminum, oil bath crankcase

Premium roller bearing

Unitized stainless steel inlet and discharge valves

Available in "l" left-handed version

Triplex plunger pump

Direct drive with gas flange

Maximum volume: 3.5 GPM

Maximum discharge pressure: 3000 psi

Maximum inlet pressure: 125 psi

Maximum pump speed: 3400 rpm

Minimum horsepower requirements: 10.8 hp for gas engines

Bore: .591" (15mm)

Stroke: .295" (7.5mm)

Crankcase capacity: 14 oz. Nondetergent SAE 30w oil

Maximum fluid temperature: 165 degrees f.

Inlet port thread: 1/2" FPT

Discharge port thread: 3/8" FPT

Shaft diameter: 1" id gas flange

Dimensions: 8.8" x 9.7" 6.5"

Weight: 20 lb.

Lubrication: Fill the crankcase to dot on oil gauge window per specifications with non detergent SAE 30w oil. Change the oil after a 40 break-in period, then every three (3) months or 500 hour intervals thereafter.