EB4042HV PORTABLE CART COLD 4 GPM 4200 PSI PRESSURE WASHER

Portable cart cold 4 GPM 4200 psi pressure washer EB4040HV.

3–4-week lead.

Please call 727-562-5488 m-f 8a-5p to order this unit. The unit must be ordered over the phone and can be shipped anywhere in the United States.

4 GPM 4200 psi Honda GX390 13 hp viper pump v-belt 50 mesh inlet filter, commercial unloader, low oil shutdown, pneumatic tires, thermal relief valve, gun/wand assembly with general pump quick connects, 50' high-pressure grey hose with general pump quick connects, 5 general pumps quick connect nozzles, 20% high draw chemical injector assembly with general pump quick connects.

We highly recommend adding the best high-pressure 3/8" ball valve (6292) to this order to allow you to turn off the flow of water to switch from the gun to a whisper wash 16" ultra surface cleaner (6717).

The 16" whisper wash ultra with the upgraded 3/8" high-pressure hose is the perfect complement to this cold-pressure washer.

If supplying a garden hose from a property, use a 3/4"id garden hose. If supplying water from a tank, use a 1" non-collapsible suction hose (agc16) with a 1" y-strainer (ys16h). We have a 4 GPM plumbing kit for pressure washers that includes everything needed to plumb this unit to a tank (pl-4-ta or pl-4-to).

Install a high-temperature Hudson float valve (Hudson-ht) using everything you need to install it with our Hudson assembly (Hudson-a). The Hudson assembly is installed into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from overflowing.

This pressure washer is available in either a skid unit or a portable cart for the same cost.

The inlet line size should be adequate to avoid starving the pump. The line size must be a minimum of one size larger than the pump inlet fitting. Avoid tees, 90-degree elbows, or valves in the inlet line of the pump to reduce the risk of flow restriction and cavitation. • the line must be a flexible hose, not a rigid pipe, and reinforced on suction systems to avoid collapsing. • the simpler the inlet plumbing the less the potential for problems. Keep the length to a minimum, the number of elbows and joints to a minimum (ideally no elbows) and the inlet accessories to a minimum. • use pipe sealant to assure air-tight, positive sealing pipe joints (http://www.catpumps.com/products/pdfs/993418b_ref_inlet%20condition%20check%20list_lor.pdf)

 SKU: PW.EB4042HV