3/4" SCH 80 PVC BALL VALVE CHEMICAL APPLICATOR FOR SOFTWASHING

3/4" Sch 80 PVC ball valve chemical applicator for softwashing.

Pressure washer products strongly supports educating our customer family in building their own equipment whenever possible and appropriate within safety guidelines as well as assisting you in saving money. Throughout the years, we have seen that the ball valve applicator fitted with a stainless steel coupler is the most durable and greatest long term value for use in applying highly corrosive chemicals, softwash chemicals, housewashing recipes, degreasers and acids; should any of the components of the applicator fail, an operator can usually run over to a local hardware store to pick up a replacement to keep the job running with minimal down time.

This chemical applicator is the best applicator for all 12 volt, john blue, Hypro chlorine pumps and even air diaphragm pumps.

The fittings were installed using commercial grade, non-drying liquid Teflon RectorSeal T Plus 2 pipe thread sealant with PTFE. The full port ball valve features Viton seals and will endure all chemicals standard to the softwashing industry. However, we always recommend rinsing your equipment with copious amounts of water after each use. Before you dig deeper into your own pockets to buy more chemical, remember the following saying: "the solution is dilution. Water is the universal solvent. Water, water and drench the heck out of it!'

We recommend adding a nozzle holder such as the Tribanger (nhtb) or Quadbanger (nhqb) to assist you with keeping your nozzles within reach. We also recommend keeping a few extra stainless steel sockets in stock (4629). Did you know that you can extend the life of your couplers or sockets by pulling back the collar and coating the 'stainless steel balls' with anti-seize never-seize?

SKU: BV12RB.80