5.5 GPM 60 PSI EF5500 EVERFLO 12 VOLT SOFTWASH ROOF WASH PUMP
Do not use Teflon tape on this pump. No warranty on this pump. 10-gauge wire must be used. No alligator clips used with this pump. Use a minimum 875 CCA deep cycle marine battery.
Tested at the factory and will have water in them
The Everflo EF5500 offers 5.5 gallons per minute at 60 psi powered by a deep cycle marine battery. We recommend using 10-gauge wire, a 30-amp waterproof switch and extra fuses in the waterproof fuse holder. This pump will perform at maximum efficiency using 200' of 5/8" chemical hose such as our red, blue, or yellow 5/8" flex tech rt (best quality and less temperature responsive) or the red or blue kuri tec hose, 0040, 1550 and 2550 nozzles installed in a Tribanger connected to a BV08RB.80. Use our 1" non-collapsible suction hose assembly with the original slotted PVC inlet filter for sodium hypochlorite (AG16TF08-D) installed on the end to prevent trash from entering the pump. Do not use a stainless-steel mesh filter or a filter with a fine nylon mesh covering pipe if using this pump for soft washing or with corrosive chemicals.
This (EF5500) is a stand-alone pump item. The kits we offer includes some of the other components.
- Polypropylene pump housing and valve plate
- Viton® valves – santoprene® diaphragm
- Zinc plated steel fasteners
- Painted steel 3” motor shell
- Honeywell™ micro switch™
- 60 psi (4.1 bar) max
- 5.5 GPM (20.8 lpm) max
- Round-up® ready
- Self-priming to 8 feet
- Max fluid temp 140 deg f
- 12v dc
- 17 max amps
- 1/2” npt ports
- Ce approved*
- 5.6 lbs dry
- Inline fuse protection
Tested at the factory and will have water in them.
Do not use Teflon tape on this pump. No warranty on this pump. 10 gauge wire must be used. No alligator clips used with this pump. Use a minimum 875 cca deep cycle marine battery.
SKU: EF5500