1/2" ORIGINAL PVC SLOTTED INLET FILTER FOR SODIUM HYPOCHLORITE

This is an original slotted PVC filter approximately 1" x 8-12" long with a 3/4" FPT to accept a 1/2" hose barb.  a 1/2" SCH 80 hose barb is included with the purchase. This filter is finely slotted but allows for tremendous flow.  Beware of filters that offer a nylon screen or low grade stainless steel screen over the PVC. The nylon and ss screen will break down quickly and end up sucked into the pump

Do not purchase this for a chemical injector pick-up. Choose the tf-c with a 1/4" barb included made especially for the 1/4" tube.

Installed with an elbow for top draw from tank and to allow user to fit the slotted filter end into the bung opening of a 55 gallon drum.

Do not hard pipe plumb this filter into the tank.  you must be able to remove the slotted filter to clean the debris and salts from the surfaces.

***Rex, the Pump Guru, invented this slotted filter for use with sodium hypochlorite.***

FYI:

The general rule of thumb when plumbing a pump is as follows:

Double the hose inner diameter in comparison to the pump inlet and always use non-collapsible hose

Condition: New

SKU: TF-08