4 GPM 3500 PSI PORTABLE COLD BANDIT PRESSURE WASHER
4 GPM 3500 psi portable cold bandit pressure washer.
4 weeks lead on this unit.
Please order this unit by calling 727-562-5488 or 800-519-9279 m-f 8a-5p est. we ship everywhere.
4 GPM 3500 psi Honda gx390 13 hp general pump ts1511 pump.
1 1/4" tubing operator handle and aluminum frame.
50 mesh ss inlet filter.
External unloader and bypass.
Low oil shutdown.
13" tubed pneumatic tires.
Easy access two-piece belt guard.
3-groove 'bandit' belt for uniform tension and maximum power transfer.
43" x26" x 27" 144 lbs.
36" gun/wand assembly with quick connects, 50' high pressure grey hose with quick connects, 5 quick connect nozzles, high draw chemical injector assembly with quick connects.
We highly recommend adding the best high pressure 3/8" ball valve (6292) to this order to allow you to turn off the flow of water to switch from the gun to a whisper wash ultra surface cleaner.
The 16" whisper wash ultra with the upgraded 3/8" high pressure hose is the perfect complement to this cold pressure washer.
If supplying with a garden hose from a property, use a 3/4" id garden hose. if supplying water from a tank, use 1" non-collapsible suction hose with a 1" y-strainer (ys16h). We have a 4 GPM plumbing kit for pressure washers that includes everything needed to plumb this unit to a tank (pl-4-ta or pl-4-ta).
Install a high temperature Hudson float valve (hudson-ht) using everything you need to install it with our Hudson assembly (hudson-a). The Hudson assembly installs into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from over-flowing.
This unit is available in skid or portable cart for the same cost.
Inlet line size should be adequate to avoid starving the pump. • line size must be a minimum of one size larger than the pump inlet fitting. Avoid tees, 90-degree elbows or valves in the inlet line of the pump to reduce the risk of flow restriction and cavitation. • the line must be a flexible hose, not a rigid pipe, and reinforced on suction systems to avoid collapsing. • the simpler the inlet plumbing the less the potential for problems. keep the length to a minimum, the number of elbows and joints to a minimum (ideally no elbows) and the inlet accessories to a minimum. • use pipe sealant to assure air-tight, positive sealing pipe joints (http://www.catpumps.com/products/pdfs/993418b_ref_inlet%20condition%20check%20list_lor.pdf)
SKU: PW.B4035HG