EB4035HG-E KEY START PORTABLE COLD 4GPM 3500PSI POWER WASHER
Pressure-pro electric key starts portable cold 4 GPM 3500 psi pressure washer EB4035HG-E.
Please call 727-562-5488 m-f 8a-5p to order this unit. The unit must be ordered over the phone and can be shipped anywhere in the United States.
4 GPM 3500 psi Honda gx390 13 hp general pump ts1511 v-belt, marine battery box with battery, pneumatic tires, 50 mesh inlet filter, commercial unloader, low oil shutdown, thermal relief valve, gun/wand assembly with general pump quick connects, 50' high-pressure grey hose with general pump quick connects, 5 general pumps quick connect nozzles, 20% high draw chemical injector assembly with general pump quick connects.
We highly recommend adding the best high-pressure 3/8" ball valve (6292) to this order to allow you to turn off the flow of water to switch from the gun to a whisper wash ultra surface cleaner.
The 16" whisper wash ultra with the upgraded 3/8" high-pressure hose is the perfect complement to this cold-pressure washer.
If you are supplied with a garden hose from a property, use a 3/4"id garden hose. If supplying water from a tank, use a 1" non-collapsible suction hose (agc16) with a 1" y-strainer (ys16h). We have a 4-gpm plumbing kit for pressure washers that includes everything needed to plumb this unit to a tank (pl-4-ta or pl-4-to).
Install a high-temperature Hudson float valve (Hudson-ht) using everything you need to install it with our Hudson assembly (Hudson-a). The Hudson assembly installed into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from overflowing.
This unit is available in skid or portable cart for the same cost.
Inlet line size should be adequate to avoid starving the pump. The line size must be a minimum of one size larger than the pump inlet fitting. Avoid tees, 90-degree elbows, or valves in the inlet line of the pump to reduce the risk of flow restriction and cavitation. • the line must be a flexible hose, not a rigid pipe, and reinforced on suction systems to avoid collapsing. • the simpler the inlet plumbing the less the potential for problems. Keep the length to a minimum, the number of elbows and joints to a minimum (ideally no elbows) and the inlet accessories to a minimum. • use pipe sealant to assure air-tight, positive sealing pipe joints (http://www.catpumps.com/products/pdfs/993418b_ref_inlet%20condition%20check%20list_lor.pdf)
SKU: PW.EB4035HG-E