6012PRO-20G-VANGUARD PRESSURE-PRO HOT SKID POWER WASHER 5.5 GPM
6012pro-20g-vanguard pressure-pro hot skid power washer 5.5 GPM 3500 PSI.
Order this unit by calling 727-562-5488 m-f 8-5 est.
Rugged powder coated steel, low-profile frame w/ forklift channels.
48′ l x 43′ w x 48′ h frame dimensions offer versatile installation.
Super-efficient schedule 80 coil.
Stainless steel coil wrap, burner hood, and control panel.
On board 15-gallon poly fuel tank-non-carb evaporative compliant.
Reliable vanguard gasoline commercial/industrial electric start engines.
Includes 12-volt battery and marine battery box.
Fully self-contained, no external power required.
Belt driven general pump.
Pressure trapped unloader: never adjust the unloader. Always use a nozzle orifice 6.5 and larger to change the pressure.
Reliable Beckett burners.
Adjustable thermostat.
3vx belt system offers balanced power transfer.
Engine and pump oil drains offer easy maintenance.
Safety pressure relief valve.
120-degree temperature rise available.
Arrives ready to use. Add fuel and connect to a minimum of 100 gallons water tank or ibc tote using a 1" non-collapsible suction hose (agc16), 1" hose barb (hb1608b), bulkhead for your tank supply port (4491) and a 1" 80 mesh filter (ys16h). Don't forget to bypass back to the tank using 3/8" id yellow ag hose (agy06), a brass hose barb (4784) and bulkhead (4468).
Add a high temperature Hudson float valve (Hudson-ht) and Hudson float valve installation kit (Hudson-a) to prevent over-filling your water tank. The Hudson float valve will automatically stop the flow into your tank when installed properly in the headspace of your water supply tank.
Check out our plumbing diagram at the link below:
https://www.pressurewasherproducts.com/pressure-washer-plumbing.html
Standard accessories included below:
Gun/wand assembly with insulated grip and quick connects.
50′ high pressure hose w/quick connects.
Maxi-Flo 20% chemical injector assembly w/quick connects.
4 color-coded qc spray nozzles.
1 color-coded qc chemical nozzle.
Note:12v units include 20 amp charging system.
Note: all units are completely factory assembled, tested in the USA, and delivered ready to operate.
We ship anywhere with the best rates.
We recommend the whisper wash 19" classic (4345) or maybe a 24" ground force or 24" lil big guy for use with this 5.5 GPM hot skid. Using a larger diameter surface cleaner will cause the user to move more slowly than if using the 19" unit.
Always use medium thread lock on your high-pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles.
Are you tired of releasing the gun trigger to watch pressure build up in the high-pressure hose, gun, wand, quick connects and O-rings?
Tired your pump going into bypass because another O-ring failed, and you need to replace the plug and/or coupler?
Do you want a smooth action when you pull your gun trigger?
Do you need to place a death grip on your ladder when you pull the trigger on your gun to prevent falling?
Switch to the 'Cadillac of unloaders' k7.2 flow sensitive unloader or 6012pro-20g-vk7.2 to eliminate these problems. Everything under pressure lasts longer.
If using a chemical injector, install the injector only when in use and install it several feet downstream of the unloader to prevent back-siphoning into the unloader/pump manifold.
SKU: PW.6012PRO-20G-V