3/4" MPT X 1 1/2" HOSE BARB BRASS FOR PUMP INLET

3/4" MPT x 1 1/2" hose barb brass for pump inlet.

This is a very difficult hose barb to find. This will allow you to correctly plumb your 8 GPM pump with 1 1/2" non-collapsible suction hose. Don't forget to add the 1 1/2" 80 mesh filter (ys24).  Before installing into your pump manifold, review the orientation of the pump. Do you need to add a street 90 in brass (2104) to allow you to connect to the water supply tank?  Pick up at least four stainless steel hose clamps to install the supply hose (1556 or 3599).

This hard to find hose barb is part of the plumb-8 kit.

Check out our diagram showing you how to correctly plumb your pressure washer to a water tank.

Https://www.pressurewasherproducts.com/pressure-washer-plumbing.html

We carry this same hose barb in sch 80 PVC for your 1" air diaphragm pump!  Look for part hb2416pvc.

 SKU: 5049